Home > Our Products > Elevator Buckets > Elevator buckets - Jet

Plastic Euro JET

The plastic "EURO JET" is molded with injection of very high pressure, it can be made of HD Polyethylene, Polyamide or Polyurethane.
Thanks to its parabolic shape, the Plastic "EURO JET" bucket gives very good performances especially with dusty products considered as difficult.

TECHNICAL SPECIFICATIONS :
Thanks to its parabolic shape, the Plastic "EURO JET" bucket enables :

Increased outputs in a very large of use speeds and with all types of dusty products even very difficult (sticky, greasy, very wet...).
HD Polyethylene, Polyamide, or Polyurethane manufacturing, injected with a very high pressure rear and front mouldings, reinforced pressed holes and round corners.
Do not hesitate in contacting our R&D department.

N°	A mm	B mm	C mm	Holes			Capacity		Buckets /m	KG
N°	A mm	B mm	C mm	Nbr	D mm	E mm	Z2	Z1	Buckets /m	PE H.D.	PA	PU
EJE 10-090	105	95	65	2	8	50	0.33	0.25	14	0.08	0.10	0.11

EJE 13-120	135	125	85	2	8	70	0.70	0.50	11	0.15	0.18	0.20
EJE 15-120	157	132	88	2	8	80	0.90	0.60	11	0.16	0.19	0.21

EJE 18-140	185	145	92	2	8	100	1.25	0.80	10.50	0.20	0.24	0.26

EJE 20-165	204	174	117	2	11	100	2.15	1.60	9	0.37	0.44	0.49
EJE 23-165	240	170	115	2	11	120	2.25	1.65	9	0.40	0.48	0.52
EJE 28-165	290	170	115	3	11	80	2.90	2.10	9	0.55	0.66	0.72

EJE 30-180	315	190	130	3	11	100	4.00	3.10	8	0.75	0.90	1.00

EJE 33-215	340	220	140	3	11	120	5.50	4.00	7.14	0.70	0.84	0.91
EJE 37-215	380	220	140	4	11	90	6.20	4.20	7.14	0.80	0.96	1.04

See in the same category :

STEEL JET - PLASTIC JET - SILO JET - STEEL EURO JET - PLASTIC EURO JET - SUPERBOL JET - STEEL MAXI JET - Junction - Bolts -