Home > Our Products > Elevator Buckets > Elevator buckets - Jet

Steel Euro JET

Pressed steel bucket of very high resistance without any welding, the "EURO JET" gives, with its parabolic shape, very good performances especially when it is used on dusty products known as difficult.

TECHNICAL SPECIFICATIONS :
With its parabolic shape

Increased output in a large range of speeds and with all difficult dusty products (sticky, greasy or very wet)
Monobloc pressed tough manufacturing without any welding
Do not hesitate in getting in touch with our R&D department

N°	A mm	B mm	C mm	Holes			Capacity		Buckets /m	KG
N°	A mm	B mm	C mm	Nbr	D mm	E mm	Z2	Z1	Buckets /m	1,0 mm	1,2 mm	1,5 mm	2,0 mm	2,5 mm
EJE 10-090	105	93	66	2	8.50	50	0.35	0.25	14	0.15

EJE 12-100	125	104	78	2	8.50	67	0.55	0.35	12		0.23

EJE 13-120	135	115	81	2	8.50	70	0.65	0.45	12		0.28

EJE 16-130	165	130	87	2	8.50	100	0.95	0.60	12			0.44

EJE 18-140	185	140	90	2	8.50	100	1.20	0.83	10.5			0.55
EJE 20-140	205	140	90	2	11	100	1.45	1.05	10.5			0.61

EJE 23-165	238	165	110	2	11	120	2.45	1.73	9				1.18
EJE 25-165	258	165	110	3	11	77	2.70	2.00	9				1.27
EJE 28-165	288	165	110	3	11	80	3.00	2.25	9				1.40

EJE 30-180	308	187	120	3	11	100	3.70	2.45	8.13				1.55

EJE 30-215	308	215	140	3	11	100	5.20	4.00	7.14				1.94	2.40
EJE 33-215	338	215	130	3	11	120	5.50	3.95	7.14				1.97	2.50
EJE 37-215	378	215	130	4	11	90	6.20	4.10	7.14				2.25	2.86
EJE 44-215	448	215	130	5	11	90	7.50	5.60	7.14				2.70	3.20

See in the same category :

STEEL JET - PLASTIC JET - SILO JET - STEEL EURO JET - PLASTIC EURO JET - SUPERBOL JET - STEEL MAXI JET - Junction - Bolts -